Adhesives/Sealants for Pool & Spa Applications

NovaLink SL Pool Joint Sealant for Surrounding Pool & Spa Decks

Formulated especially for damp conditions, NovaLink SL Pool Deck Joint Sealant is ideal for sealing around pools and fountains. Its excellent self-leveling properties eliminate the need for tooling. NovaLink SL Pool Deck Joint Sealant cures rapidly to a solid rubber seal that can accommodate 25% joint movement. Its unique polyether cure chemistry allows NovaLink SL Pool Deck Joint Sealant to be installed on damp concrete or in damp weather conditions without "outgassing" or forming CO2 bubbles, as urethane sealants often do. Its excellent self leveling properties and smooth finish allow NovaLink SL Pool Deck Joint Sealant to be installed without tooling. The elimination of masking tape and tooling results in a significant reduction in labor. NovaLink SL Pool Deck Joint Sealant is solvent free and will not shrink. Its excellent adhesion to clean masonry or concrete allows it to be installed without a primer in most joints smaller than 1/2 inch wide.

Purchase chemlink products


  • Solvent free, 100% solids will not shrink
  • 30 minute skin over
  • No outgassing on damp surfaces
  • Color stability, will not suntan
  • Paintable within 24 hours (See limitations)
  • +/- 25% joint movement

Regulatory Compliance

Green Standards:

  • Conforms to OTC Rule for Sealants
  • Meets requirements of California Regs: CARB and SCAQMD
  • This product does not contain cancer causing chemicals listed in California Proposition 65
  • Conforms to USDA Requirements for Non-food Contact
  • LEED 2.2 for New Construction and Major Renovations: Low Emitting Materials (Section 4.1) 1 Point
  • NAHB Model Green Home Building Guidelines: 5 Global Impact Points
  • VOC Content: less than 19 grams liter ASTM D2369 EPA Method 24 (tested at 240°F/115°C)


  • 68 oz (2011ml) Pouch
    4 pouches/carton, 45 cartons/pallet
  • 2 and 5 gallon pails, 20 oz sausages or 50 gallon drums available by special order only.