Elastomeric Sealant Provides 35% Joint Movement

NovaLink 35 Concrete/Masonry Joint Sealant

NovaLink 35 is a moisture curing, polyether, elastomeric joint sealant designed for application in damp, dry or cold climates. NovaLink 35 is solvent free and contains no isocyanates. NovaLink 35 will not shrink upon curing, will not discolor when exposed to UV light, and can not “outgas” or bubble on damp surfaces as urethane sealants often do. NovaLink 35 has excellent adhesion to most construction materials and resilient elastomeric properties. NovaLink 35 is capable of joint movement in excess of 35% compression and extension. Because it cures in wet or dry climate conditions and at low temperatures 32°F (0°C), NovaLink 35 can be used effectively in many difficult construction site conditions..

Purchase chemlink products

Advantages

  • Solvent free, 100% solids will not shrink
  • 30 minute skin over
  • No outgassing on damp surfaces
  • Color stability, will not suntan
  • Paintable within 24 hours (See limitations)
  • +/- 35% joint movement

Regulatory Compliance

Green Standards:

  • Conforms to OTC Rule for Sealants
  • Meets requirements of California Regs: CARB, BAAQMD and SCAQMD
  • This product does not contain cancer causing chemicals listed in California Proposition 65
  • Conforms to USDA Requirements for Non-food Contact
  • LEED 2.2 for New Construction and Major Renovations: Low Emitting Materials (Section 4.1) 1 Point
  • NAHB Model Green Home Building Guidelines: 5 Global Impact Points
  • VOC Content: less than 19 grams liter ASTM D2369 EPA Method 24 (tested at 240°F/115°C)

Packaging

  • 10.1 oz (300 ml)
    24 cartridges/carton, 45 cartons/pallet
  • 20 oz (600 ml)
    12 sausages/carton, 40 cartons/pallet
  • 2 and 5 gallon pails or 50 gallon drums
    available by special order