Concrete & Masonry Texturized Sealant

Concrete & Masonry Texturized Sealant

joint sealant designed for application in damp, dry or cold climates. NovaLink TX is solvent free and contains no isocyanates. NovaLink TX will not shrink upon curing, will not discolor when exposed to UV light, and can not "outgas" or bubble on damp surfaces as urethane sealants often do. NovaLink TX has excellent adhesion to most construction materials and resilient elastomeric properties. NovaLink TX is capable of joint movement in excess of 35% compression and extension. Because it cures in wet or dry climate conditions and at low temperatures 32°F (0°C), NovaLink TX can be used effectively in many difficult construction site conditions.

Purchase chemlink products

NovaLink TX Advantages

  • Solvent free, 100% solids will not shrink
  • Textured appearance compliments rough surfaces
  • No outgassing on damp surfaces
  • Single-component helps reduce labor costs
  • No primer required for most construction materials
  • Paintable within 24 hours (See limitations)
  • +/- 35% joint movement)

Regulatory Compliance

  • Conforms to OTC Rule for Sealants
  • Meets requirements of California Regs: CARB, BAAQMD and SCAQMD
  • This product does not contain cancer causing chemicals listed in California Proposition 65
  • Conforms to USDA Requirements for Non-food Contact

Green Standards:

  • LEED 2.2 for New Construction and Major Renovations: Low Emitting Materials (Section 4.1) 1 Point
  • NAHB Model Green Home Building Guidelines: 5 Global Impact Points
  • VOC Content: less than 19 grams / liter ASTM D2369 EPA Method 24 (tested at 240°F / 115°C)

Packaging

  • 10.1 oz (300 ml)
    24 cartridges/carton, 45 cartons/pallet
  • 20 oz (600 ml)
    12 sausages/carton, 40 cartons/pallet
  • 2 and 5 gallon pails or 50 gallon drums
    available by special order