download pdfNovaLink 35 Data Sheet


NovaLink All Weather Construction Sealant

Standards and Compliance

  • ASTM C-920, Type S, Grade NS, Class 35, Uses NT,T, M,G, A, and O
  • Federal Specification TT-S-00230-C Type II, Class A
  • Corps of Engineers CRD-C-541, Type II, Class A
  • Canadian Standards Board CAN 19, 13-M82
  • Conforms to OTC Rule for Sealants and Caulks
  • Meets requirements of California regulations CARB, SCAQMD and BAAQMD
  • This product does not contain cancer causing chemicals listed in California Proposition 65
  • Conforms to USDA requirements for non-food contact

Packaging

  • 50 gallon, open head, pump drums
  • 5 gallon pump pails
  • Sausages available on request
  • Cartridges, 10.1 oz and 28 oz.

Product Description

NovaLink 35 is a moisture curing, polyether sealant designed for application in damp, dry or cold climates. It is solvent free and contains no isocyanates. The product will not shrink upon curing, will not discolor when exposed to UV light, and can not "outgas" or bubble on damp surfaces as urethane sealants often do. It has excellent adhesion to most construction materials and resilient "elastomeric" properties. The product is capable of joint movement in excess of 35% compression and extension. Because it cures in wet or dry climate conditions and at low temperatures (32°F / 0°C), it can be used effectively in many difficult construction site conditions.

Advantages

  • Solvent free, 100% solids will not shrink
  • Non-slump, applies vertically and overhead
  • 20 minute skin over, will not pick up dirt
  • No outgassing on damp surfaces
  • Very good color stability, will not suntan
  • Paintable within 24 hours

Green Standards

  • LEED for New Construction and Major Renovations: Low Emitting Materials (Section 4.1) eligible 1 Point
  • NAHB Model Green Home Building Guidelines: 5 Global Impact Points
  • This product does not contain any cancer causing chemicals listed in California Proposition 65
  • VOC Content at 240° F: less than 19 grams/liter (including water), ASTM D2369, EPA Method 24