PDF DownloadQuick Set Data Sheet

Advantages

  • 100% VOC compliant
  • Tough elastomeric bonds
  • Non-flammable
  • Solvent free
  • Fast setting
  • High adhesion
  • Non-carcinogenic
  • HAPs free

Packaging

  • 50 gallon, open head, pump drums
  • 5 gallon pump pails
  • Cartridges, 10 oz and 28 oz.
  • 20 oz sausages

Description

Quick Set construction adhesive is a single component, construction adhesive, designed for assembling metal to wood, and metal to fiberglass framing in shear walls, floors, and bulkheads. Other suitable applications include: roof framing in recreation vehicles, trailers, manufactured housing and other industrial applications requiring speed, strength and economy. Quick Set is applied in beads and achieves over 50 PSI of green strength within one hour, on metal to wood assemblies. Ultimate shear strength is about 250 PSI or about 3000 pounds per linear foot of bond area. Quick Set is easily applied from cartridges, sausages, or bulk pumping equipment. It's thixotropic viscosity allows it to be applied on vertical or overhead surfaces. Quick Set has excellent fixturing properties and requires minimal external support while green strength develops. Vertical side walls can be moved or machined in less than an hour.

Quick Set is moisture curing and operates best in high humidity and temperature. Cold, or dry environments will slow the strength development of any moisture cure adhesive. Because of it's rapid polymerization Quick Set bonds should be assembled within 15 minutes of applying beads to prevent "skinning over" of the adhesive surface.

Industrial Uses

  • Bonding roof and wall sheathing to wood and metal studs
  • Installing EPS foam insulation
  • Wood to metal assemblies
  • Installing cabinetry and sink tops
  • Installing "tack strip" to secure carpeting
  • Structural Insulated Panels (SIPs)