Roof Tile Adhesive For Installation & Repairs

TileSecure Roof Tile Adhesive & Sealant

TileSecure Roof Tile Adhesive is a high-performance, moisture-curing polyether adhesive, formulated for installation and repair of clay, composite, concrete, and slate roof tiles. TileSecure is a one component, ready to use adhesive formulated to install and repair a variety of natural and synthetic roof tiles. TileSecure is UV resistant, 100% solids, contains very low VOC's and no California Proposition 65 listed materials. The non-sag, quick setting formulation is especially designed for roof tiles, valley and edge tiles, wall tiles and the repair of broken tiles. TileSecure may be painted and will provide a long lasting adhesive seal.

Purchase chemlink products


  • Solvent free, 100% solids, will not shrink
  • No outgassing on damp surfaces
  • Paintable within 24 hours
  • Can be applied at temperatures down to 32°F (0°C)
  • Non-Slump, applies vertically and overhead
  • Very good color stability, will not suntan
  • Non-carcinogenic

Green Standards

  • LEED 2.2 for New Construction and Major Renovations: Low Emitting Materials (Section 4.1) 1 Point
  • NAHB Model Green Home Building Guidelines: 5 Global Impact Points
  • VOC Content: less than 25 grams/liter ASTM D2369 EPA Method 24 (tested at 240°F/115°C)

Regulatory Compliance

  • Conforms to OTC Rule for Adhesives
  • Meets requirements of California Regs: CARB and SCAQMD
  • This product does not contain cancer causing chemicals listed under California Proposition 65
  • Conforms to USDA Requirements for non-food contact


  • 10.1 oz (300ml) cartridges
    24 cartridges/carton, 45 cartons/pallet
  • 2 and 5 gallon pails, or 50 gallon drums
    available by special order